TV 240

TV 240
References

Venetian blind for outdoor and indoor, made of painted crowned aluminium coil, with a section of 50 / 60 / 80 / 100 /150 mm and thickness 0,45 / 0,60 mm. The slat punching are Ø 10 mm for the lift tape and oval 7 x 20 mm for the side cable guides and can be protected from the wearing with a PA6 nylon protection bushing. Slats are passed manually through the ladder braid and their strands are blocked to the slat with two tabs created on the left and on the right of the hole. This fixing – which is made every 5 slats - is useful to keep the ladder braid and the slat joined together and to avoid vertical movement.
The drive mechanisms are enclosed in a 60 x 62 mm extruded aluminium head box. The spools allow the slats to lower closed and to tilt of 90° in every position. The blind raise with horizontal slats.
The ladder braid is made of special polyester, specific for outdoor use, while the lift tape is made of UV-resistant Texband.
The bottom rail – where the closing components of the blind are housed - can be of different dimensions and is made of extruded aluminium, either anodized or painted.
The side cable guides are made of PA6 coated stainless steel. They are fixed to the headbox by a support with a tension spring, while on the lower part they are fixed inside a screw coupling.
The blind can be operated by crank drive or by a 230V 50Hz IP 44 motor, with a Stas IP54 plug and a 80 cm long H05RRF4G075 cable. The motor can be operated in an individual, grouped or centralized way.
Slats can be perforated. Perforation size and spacing are variable according to the slat dimension.

For sizes, see tables.

Wind load resistance: class 4

(test dimensions: 3300 x 3600).

ESPLOSO - SEZIONI TV240

ESPLOSO TV240-150

SEZIONI TV 240-150

ESPLOSO TV240-100

SEZIONI TV240-100

ESPLOSO TV240-80

SEZIONI TV240-80

ESPLOSO TV240-60

SEZIONI TV240-60

ESPLOSO TV240-50

SEZIONI TV 240-50

SEZIONI TV240-25

ESPLOSO TV 240-25