TVB 58 - 80

TVB 58 - 80
References

Rolled edge slat venetian blind for outdoor use made of painted crowned aluminium coil, with a thickness of 0,45 mm and a section of 100 mm for the 80 mm slats and 73 mm for the 58 mm slats.
The slat punching for the lift tape is Ø 8 mm with a rolled edge, to avoid friction between the tape and the aluminium while the blind is operating.
Each slat has a releasable unilateral pin made of synthetic material, which runs on special side guides maintaining the slats in their position even in severe weather conditions.
The spools allow the slats to lower closed and to tilt of 90° in every position. The blind raise with horizontal slats.
The ladder braid is made of special polyester, specific for outdoor use, while the lift tape is made of UV-resistant Texband.
The bottom rail – where the closing components of the blind are housed - can be of different dimensions and is made of extruded aluminium, either anodized or painted.
The extruded aluminium side guides can be either anodized or painted and have seats where the antinoise seals can be inserted.
The blind can be operated by crank drive or by a 230V 50Hz IP 44 motor, with a Stas IP54 plug and a 80 cm long H05RRF4G075 cable. The motor can be operated in an individual, grouped or centralized way.
Slats can be perforated. Perforation size and spacing are variable according to the slat dimension.
TVB 58 Ø3 - TVB 80 Ø3: the blind can have a PA6 nylon coated stainless steel cable guide with 7 x 20 mm oval punching.

For sizes, see tables.

Wind load resistance: class 4

(test dimensions: 3300 x 3600).

SEZIONI TVB 80 3

SEZIONI TVB 80

SEZIONI TVB 58 3

SEZIONI TVB 58

ESPLOSO TVB 80 3

ESPLOSO TVB 80

ESPLOSO TVB 58 3

ESPLOSO TVB 58

ESPLOSI SEZIONI TVB 58-80