TVB Z

TVB Z
References

External hemmed slat venetian blind, realized by pre-painted aluminium slat with a 112mm section and 0,45mm thickness, where a neoprene gasket is insterted to one side in order to to attenuate the noise among the metals and to almost darken. The perforations on the slats for the lift tape are circular and bordered with the same material, to avoid rubbing with the lift tape. Every thin plate will be provided of a jerky unilateral pivot in synthetic material, which will slide on special side guides not allowing the same to escape from the guides and remaining in the best position even if solicited by atmospheric phenomenons. The manoeuvre and command mechanisms are contained in an upper aluminum headbox, with a 60x62 mm section. Spools will allow the lowering of the slats in closed position with possibility of orientation of 90° in any position, while the raising will happen with slats in horizontal position. The external vertical band will be in polyester with an eyelet able house the stainless steel hook previously clipped to the slats as a support. The lift tape will be made in resistant Texband against the UV rays. The hembar will be in extruded of anodized aluminum or painted. Inside it there will be all the blind's closing components. Side guides will be in anodized or painted extruded aluminium, with grooves to receive the anti-noise gaskets. Blind will be manually operated by a crank handle or with a 230V 50Hz IPs 44 motor (complete of Stas IP54 plug) with possibility of single or centralized control.

SEZIONI TVB Z AUTOPORTANTI

SEZIONI TVB Z

ESPLOSO TVB Z AUTOPORTANTI

ESPLOSO TVB Z

ESPLOSI SEZIONI TVB Z