TFF 185

TFF 185

Outdoor multi-crystalline photovoltaic fin louver, installed on an extruded aluminum frame with internal seats to which the stainless steel caps and their pins can be fastened. At each end, there will be stainless steel caps with pins Ø 7mm. Slats will have a variable distance between centres according to the dimension of the fin. Cap pins are hosted inside the PVC bushings, previously fixed to the aluminum vertical mullion 60x90. This mullion can be fixed to the wall, either to the frame or with aluminum spacers. A snap profile 60 x 27 conceals the mechanisms and the fins, to allow an easy installation and/or replacement. Fins are tilted in one direction thanks to a 15mm square rod, connecting the caps with an arm and a nylon bushing. The rod is connected to a 230V IP65 motor drive piston, which is fixed to the vertical mullion from the opposite side assuring the thrust for the fin drive. The drive piston stroke is about 200mm and can be adjusted by a switch limit. All parts are made of aluminum, which can be either anodized or painted according to the RAL chart.

DEPLIANT